PureFlo ESM + PF60 PAPR (NIOSH Approved)

• No trailing leads, hoses or cables for maximum mobility, reliability and less maintenance.
• No belt mounted blower unit required which improves comfort and makes the PAPR ideal for use with a range of protective workwear.
• The unique air circulation system creates a smooth continuous flow of air that draws air from surrounding environment through filter located at rear of helmet.
• The advanced electronics package within the ESM+ continually monitors all functions and provides a self-diagnostic system check to ensure proper functioning.
• The improved electronics provide an increase flow rate at 8.1 CFM/230Lpm.
• Contains a fully capsuled blower module with a single 7-way IP67* connector between the sidebars and blower/motor unit with a standard internal on/off switch, in addition to having an external power switch option like the standard ESM.
• Adjustable flame retardant Neck Cape, when sealed, creates self-contained positive pressure environment, providing additional protection to the lower face and neck area.
• APF of 1000 shown by a Simulated Workplace Protection Factor (SWPF) study.
• Wide vision face-shield manufactured from high impact-resistant polycarbonate with anti-mist and anti-scratch coating. The securely sealed shield provides protection against impact, high impact (ANSI Z87+ compliant) and splashes.
• Hard Hat provides ANSI Z89.1 compliant head protection. Black, White, Yellow & Hi-Viz colors available.
• Quick Release Headband makes the product simple to clean and allows the helmet to be adjusted quickly and easily for different head sizes and shapes; achieving optimum comfort, balance and fit.
• Cable clamps securely connect cables to the sidebars for added relief of strain.
• Choice of HEPA (HE) filter or a combination HE/HF/HC filter (Hydrogen Fluoride and Hydrogen Chloride); both remove 99.97% of liquid or solid based contaminants; effective for removal of nuisance odors from organic vapors.
• Includes a corrosion resistant gold-plated battery and updated rustproof hardware.
• Redesigned PCB with new electronics board and an altitude sensor which adjusts automatically.
• Enhanced Blower/Motor assembly includes:
• Integrated on/off switch with optional external on/off
• Sealed electronics enclosure requires less maintenance and improves reliability
• No user serviceable parts
• Decreased fan vibration which provides a quieter experience for the wearer
• 5 cell battery pack
• Air duct profiled for low pressure drop, improved energy efficiency, directed into the shell comb, air will follow the inside of the shell into the breathing zone
• Vent patch and audible warning sounder outlet

*IP67 = 6 – protection against dust / 7- protection against the effect of immersion between 15 cm and 1m

Certification Letter

The PureFlo ESM + PF60 PAPR is a NIOSH approved respirator system, which is also compliant with CSA Z94.4‐11. The respirator selection process used in CSA Z94.4‐11 is based on NIOSH criteria for the testing and certification of a respirator. Refer to the Instructions For Use (IFU), the NIOSH approval label provided with the respirator or click below for a listing of components and optional accessories that can be used.

• Respirator
• Filter
• Cartridge

Certified by the Safety Equipment Institute (SEI), the PureFlo ESM + PF60 PAPR is in accordance with the requirements of ANSI/ISEA Z87.1-2015 and ANSI/ISEA Z89.1-2014, American National Standard for Industrial Head Protection.

• Faceshield
• Hard Hat

Product Data Sheets
     PureFlo ESM+ PF60 PAPR
     PureFlo ESM+ PF60 PAPR for Welding
     PureFlo ESM+ PAPR Visor and Fixed Visor Assemblies
     PureFlo Radiant Heat Kit

Instructions for Use
     Instructions
     Video

PF3000 vs ESM+ Product Comparison

Parts and Accessories

Product Education

Product Warranty

SEI Certificate

PureFlo ESM+ PF60 PAPR Maintenance Guide

PureFlo ESM+ PF60 PAPR Cleaning & Decontamination Guidelines