Most of our visors are made from Polycarbonate (PC). The advantage of polycarbonate is the higher impact strength and its high temperature resistance. Cellulose-Acetate Visors (CA), which have a higher chemical resistance but provide less impact protection, can be made to order.
Gold-coated visors serve as heat protection. The thin layer of gold reflects a large part of the heat, allowing you to work longer in front of strong heat sources, while also providing IR-protection in different shades.
Features & Specifications
- Secondary Visor 5.0 Shade Green
- High quality 1mm thick green polycarbonate
- Additional glare protection due to the green polycarbonate
- 500 x 250 x 1mm
- Secondary Visor 3.0 Shade Green
- High quality 1mm thick green polycarbonate
- Additional glare protection due to the green polycarbonate
- 500 x 250 x 1mm
- Secondary Half Length Visor 3.0 Shade Green
- High quality 1mm thick green polycarbonate
- Additional glare protection due to the green polycarbonate
- 500 x 125 x 1mm
- Secondary Visor Polyphenylsulphone Shade Clear
- 2mm thick green polyphenylsulphone (PPSU)
- Excellent optical quality
- High resistance to temperature extremes up to approx. +220°C/428°F
- Good UV protection
- High impact strength (EN 166 B -120m/s)
- 500 x 250 x 2mm
- Secondary Visor Gold Coated on Green
- 1mm thick green polycarbonate
- Excellent optical quality
- High resistance to temperature extremes approx. -50°C /-58°F to 135°C / 275°F
- Good UV protection
- High impact strength (EN 166 B – 120m/s)
- 94% of the radiant heat is reflected by the gold layer
- IR-protection shade 4-5
- Protected by lacquer sealing/hard coating - this provides additional protection for the layer of gold
- 500 x 250 x 1mm
- Secondary Visor Gold Coated Clear
- 1mm thick clear polycarbonate
- Excellent optical quality
- High resistance to temperature extremes approx. -50°C /-58°F to 135°C / 275°F
- Good UV protection
- High impact strength (EN 166 B – 120m/s)
- 94% of the radiant heat is reflected by the gold layer
- IR-protection shade 4-4
- Protected by lacquer sealing/hard coating - this provides additional protection for the layer of gold
- 500 x 250 x 1mm
- Secondary Visor Mesh
- Galvanized wire cloth
- Shields the face against radiant heat
- Attached to the Secondary Visor Attachment bar
- Blackened inner side ensures good visibility and prevents wearer from being blinded by glare and avoids light reflection on the inside
- Bound with metalized fabric tape
- 500 x 250 mm
- Secondary Visor Mesh of Stainless Steel
- Stainless steel
- Shields the face against radiant heat
- Attached to the Secondary Visor Attachment bar
- Blackened inner side ensures good visibility and prevents wearer from being blinded by glare and avoids light reflection on the inside
- Aluminum facing and beveled edges
- 500 x 180 mm
